Operation Guide

132 132 132 132

This structure allows for a lot of flexibility. For example on a multi-rig 3D shoot the user can either send

commands to an individual camera (e.g. Set CAM_A_L to 1/48th exposure), to a group of cameras (e.g.

Set "3DRIG_A" to 48 FPS), or to all cameras (e.g. Start Recording on all cameras). It is important to note

that with the exception of the NONE setting, all command filtering is happening on the receiver side of

the communication link.

SERIAL PROTOCOL

The camera can communicate to external devices via RS232 Serial Port and / or the Gigabit Ethernet

Port.

This selection allows the user to specify the serial communications PROTOCOL. Available options are:

• NONE (default)

• ELEMENT TECHNICA

• 3ALITY SPC 7100

• 3ALITY SPC 7000

• RED Control Protocol

• RCP 3D Metadata