Operation Guide

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
135 135
BRAIN GPIO
This menu is used to assign General Purpose Inputs and Outputs (GPIO) on the camera brain.
Defaults are Sync In and Sync Out.
When General Purpose In is selected, pull-down menus are used to assign actions.
FUNCTION DEFINITION CONNECTOR
Sync In
Accepts an Input Sync signal to control
Shutter Start timing
HD-SDI
Sync Out
Provides an Output Sync signal to act as
a Shutter Start tally.
HD-SDI
General Purpose In
Accepts an Input Trigger signal to act as
a General Purpose Input.
SYNC
General Purpose Out
Provides an Output Tally to act as a
General Purpose Output tally signal
SYNC
Note: See Appendix C for pin information.