Operation Guide

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
161 161
2. When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:
- On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed
twice (as opposed to when no media is inserted, the GUI displays NONE with three dashes
below “---“).
- On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI
displays NONE with three dashes below “---“).
- On the Side Handle, NA will be displayed (same as if no media is present).
3. To format the media select SECONDARY MENUS > MEDIA > FORMAT MEDIA.
4. You will be prompted to set the media and select FORMAT.
- Viewfinder output(s) will display “FORMATTING”.