Operation Guide

181 181

LIMITER

A limiter can be added to the analog input signal chain that adds about 12dB dynamic headroom to

avoid clipping on signal spikes. While it is best practice to use an external audio mixer to control the

signal strength the limiter can be used in more dynamic environments where an external mixer is not

practical to reduce the risk of clipped audio samples.

Note: The limiter is not available on non-upgraded Epic-M’s and early Epic-X. Please contact your

Bomb Squad representative for details how to upgrade your camera.

Channel 1/2 and channel 3/4 gain control can be linked together for easier use with external mixers and

stereo-microphones.

AUDIO RECORDING

Audio Recording is globally enabled in the

Gain In

tab in the

Audio Control Dialog

. For successful

audio recording the following parameters need to be set correctly:

• At least one channel pair has a currently present source selected

• Input gain is set correctly so that the Peak Meter show valid data

• Audio Recording is Enabled in the

Gain In

Dialog

Note: Audio will not be recorded in Varispeed or MoCo mode. However, audio will be passed through to

the headphones.