Operation Guide

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
197 197
4. Select the desired camera to connect to for REDMOTE wireless operation and press the ENTER
button in the Navigation Group. The REDMOTE will connect to the selected camera.
5. Once connected, the REDMOTE will display the key operating parameters of the selected camera.
The wireless signal strength will be shown in the lower Right corner of the REDMOTE screen.
The camera VIEWFINDER monitor output will confirm REDMOTE is wireless connection by displaying
RM and a signal strength icon in Green on the Lower Status Group.