Operation Guide

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
215 215
NOTE: If when connecting, communication is not established quickly, close the Upgrade Utility,
open it again and select Connect again. This may have to be repeated a few times until
communication is established.
6. When connected, ”Connection is Established with REDMOTE” is displayed.
7. To begin upgrade, click on “Select File”.
8. Navigate to the *.bin file for updating the REDMOTE firmware.
NOTE: If you choose an incorrect file, click on “Select File” again to locate the correct file.
NOTE: Only one file can be added for upgrade.