Operation Guide
955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
51 51
ICON BEHAVIOR
TC
• TC Gray - No analog time code is currently detected
• TC Red - Analog time code is being detected, but the use of it is not enabled
• TC Green - Analog time code is being used to jam the time of day time code. TC will revert to gray if
the signal is no longer detected
GEN
• GEN Gray - No genlock signal is currently detected
• GEN Red - During process of sync, or if genlock is lost while recording
• GEN Green - A genlock signal matching the current HD-SDI monitor rate has been locked to.
• GEN Yellow - When timing is cross-locking to compatible but not matching monitor rate. i.e. genlock
= 24.00, HD-SDI monitor rate = 25.00
NOTE: 3D operation should not be done if GEN is yellow. This is a warning condition that genlock
source settings and camera settings are not aligned.
SYNC
• SYNC Gray - The sensor sync mode is not Genlock
• SYNC Red - The sensor sync mode is Genlock, but it is not locked to any genlock signal, or genlock
or sensor sync is lost while recording
• SYNC Green - A genlock signal compatible with the HD-SDI monitor rate has been locked to and the
sensor timing is also locked to it