Operation Guide

COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B
52 52 52 52
POWER STATUS
If powering camera through DC power, the current voltage will be displayed.
If using a REDBRICK or similar external battery to power the camera through DC IN, power status
displays the current supply voltage available from the battery. Supply voltage decreases as battery is
discharged, the displayed text is color coded as follows:
• Green = 12.0 V and up • Yellow = 11.9 – 11.8 V • Red = 11.7 – 11.6 V
NOTE: The camera will automatically power down if supply voltage drops to 11.5 Volts.
If using a REDVOLT battery in the Side Handle or Battery Module to power the camera, power status
displays the location of the power source (example: SH: Side Handle; RM: Rear Module) and reports the
remaining battery capacity and the displayed text is color coded as follows:
• Green: >10 minutes • Yellow: 5-10 minutes • Red: <5 minutes
If using a RED BRICK battery connected to DC IN, power status displays BRICK and reports the % of
remaining battery capacity and the displayed text is color coded as follows:
• Green: >10 minutes • Yellow: 5-10 minutes • Red: <5 minutes