Operation Guide

955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
53 53
RAW CLIP METER
The RAW Clip meter looks a traffic light style meter and indicates if either of the Red, Blue or
Green channels of the RAW sensor data are clipping. This meter is unaffected by White Balance,
ISO, VIEW or LOOK settings and therefore represents a true measurement of the exposure
levels of the sensor at all times. The light goes on when approximately 2% of the pixels of the
corresponding channel are clipping.
RAW NOISE LEVEL BAR
The RAW noise level bar indicates pixels in the image that are in noise. At full height approximately 25% of
the pixels are underexposed and may display noise when pushed at higher ISO or FLUT values in post-
production.
RAW CLIP LEVEL BAR
The RAW clip level bar indicates pixels in the image that are clipping. At full height approximately 25% of
the pixels are overexposed and may not be recoverable by lowering ISO or FLUT values in post-
production.