Manualshelf

Operation Guide

ManualsBrandsRed Digital Cinema ManualsCamcorderRed Digital Cinema Epic 3.3
61626364656667686970
955-0002_v3.3, Rev-B COPYRIGHT © 2012 RED.cm, Inc.
61 61
FIRST TIME USE – SETTING UP YOUR RED EPIC
ATTACH POWER SOURCE
If a REDVOLT battery is installed in the Side Handle and DC power is connect through the DC IN
connector, the DC IN power supply has priority and will power the camera instead of the battery.
BATTERY
Connect a RED battery to the camera in one of the following ways:
SIDE HANDLE
Attach a Side Handle and insert a REDVOLT battery.
INSTALL
1. Press the battery door release button (A).
2. Open battery door (B).
3. Press upwards on retainer (C).
4. Insert a REDVOLT battery until it is fully seated and retainer (C) clicks into place.
5. Close battery door.
B