Operation Guide

64 64 64 64

NOTE: When fully inserted, the SSD media protrudes slightly from the SSD slot.

When SSD media is inserted into the camera, the camera will recognize if the media is unformatted:

- On LCD, EVF and external monitors, in the media section of the GUI, NONE will be displayed twice (as

opposed to when no media is inserted, the GUI displays NONE with three dashes below “---“).

- On REDMOTE, NONE will be displayed twice (as opposed to when no media is inserted, the GUI

displays NONE with three dashes below “---“).

- On the Side Handle, NA will be displayed (same as if no media is present).

To format the media select SECONDARY MENUS > MEDIA > FORMAT MEDIA.

When FORMAT is selected, a FORMAT dialog box will appear allowing you to add Camera Identity and

3D Position properties when formatting. When desired options are set, select FORMAT.

NOTE: If any clips will be erased on the attached media, you will be informed of the number.

PERFORM A BLACK SHADING CALIBRATION

Refer to SECONDARY MENUS > SETTINGS > MAINTENANCE > CALIBRATION for complete details for

performing a Black Shading Calibration.