Operation Guide

COPYRIGHT © 2012 RED.com, Inc. 955-0002_v3.3, Rev- B
88 88 88 88
protruding lug on the exterior of the lens body for mounting a supplementary finder, and this lug
interferes with the DSMC LEICA-M Mount’s lock ring.
Most Leica lenses with focal lengths of less than 50mm will encounter mechanical interference between
the rear lens cell and the camera’s front panel.
Note: Attempting to mount Leica lenses of focal lengths of less than 50mm could result in damage to
the lens and/or the camera.
A new OLPF frame (included) is required to use the Leica-M mount
Replacement OLPF frame is compatible with all DSMC lens mounts
OLPF frame upgrade may be performed by customer or RED, free of charge
ZONES
Available options are CENTER and SPOT. Default is CENTER. This control allows selection of the boxes
used to indicate objects in/out of focus.