Product Brochure
Weatherproof metallic boxes
Universal boxes and covers
Securely fastened
mounting plates
Corrosion-
resistant metal
Stainless steel springs
Clear marking
Precision-
machined
threads
Ground screw
Clean cover edges
Catalog | Red•Dot weatherproof boxes & covers 9
CCD
2CCTS
2IH5-1
IH3-1-LM
Standard finish:
− Powder-coated finish
Compliances:
− UL
®
Listed (UL File No. E-28688)
− Boxes: CSA Certified with factory installed ground screw**
− Covers: CSA Certified
− Covers suitable for use in wet locations with covers closed
− CCB and CCT series covers suitable for use in wet locations
− Federal Spec. W-C-586
− NEMA 3R Rated
Sample specifications:
− Universal device boxes and covers shall be of aluminum alloy
A380 and certified zinc alloy. All conduit stops shall be free
of rough edges. Covers shall have stainless steel springs.
Covers shall be finished with powder-coated paint. Universal
device boxes and covers shall be Red•Dot
®
Catalog No. ____________
** Consult factory for lead time and minimum quantity.
Applications:
− Dry-Tite
™
boxes and covers protect wiring devices, switches,
electronic components and terminal blocks in dry, damp and
wet locations
− Accessible wiring chamber provides a convenient location to
maintain or change a system, pull conductors and make splices
− Junction box for branch conduits
Features/Benefits:
− Alloy A380 aluminum, certified zinc alloy and stainless steel
springs provide increased corrosion resistance
− Die-cast construction and industrial design combine
to produce a rugged protective enclosure for devices
on many applications
− Clean cover edges provide good gasket sealing
− Precision-cast and machined surfaces permit safer
wire pulling
− Clear UL and cubic content markings speed approval
by inspectors
− Convenient mounting lugs for a variety of mounting methods
− Securely fastened mounting plates reduce costly callbacks
Standard materials:
− Boxes: Die-cast aluminum alloy A380
− Cover Plates: Stamped aluminum alloy or certified die-cast
zinc alloy ZAMAK 3
− Cover Lids: Certified die-cast zinc alloy ZAMAK 3
Accessible wiring chamber provides a
convenient location to pull conductors and
make splices in dry, damp or wet locations.
− Maximum cubic capacity
− Securely fastened mounting plates
− Corrosion-resistant materials
− Powder-coated finish
− Ground screw included
− Precision-machined threads
− Clear UL and cubic volume marking