Product Brochure

H-64
Zinc Concrete Slab Inserts, Elbows and Plugs
ES
6" Slab
4" Slab
ESL
Concrete slab inserts permit in-slab ceiling drops and floor mounts in poured concrete.
• For Rigid and IMC
• Slab insert is nailed to form prior to pour
• Removable seal keeps threads cement free
• ESL eliminates:
— Bends in 4" concrete slabs
— Damage to form
— Cutting off conduit stubs
• UL Listed, CSA Certified
Threaded Rigid/IMC Conduit Inserts
CAT. NO. HUB SIZE (IN.)
Straight
ES-1
1
⁄2
ES-2
3
⁄4
ES-3 1
90˚
ESL-1
1
⁄2
ESL-2
3
⁄4
ESL-3 1
Conduit running in a cement slab is attached to a 90º concrete slab insert
or conduit is bent 90º and is threaded to a straight insert. Nail or screw fitting
to wood or metal forms. After concrete is poured and forms stripped, conduit
drops quickly into fittings from floor below. Drops are easily measured from
ceiling line to switch or outlet height and cut in uniform lengths.
Conduit running in a cement slab is bent 90º to run through a hole drilled
in the form. Drilling takes time and damages the form. Stripping form often
damages conduit stubs. Varying length of stubs requires individual measuring
and cutting of conduit drops.
ESL
4" Slab
Red•Dot
®
Way
ES
6" Slab
ESL
Zinc Concrete Slab Inserts, Elbows and Plugs
Old Way
Applications:
• Permits in-slab ceiling drops and floor mounts
in poured concrete
• Provides flush threaded conduit hub for mounting,
pulling and future access to conduit systems
• Design permits prefabrication of in-slab conduit system
Features/Benefits:
• Flush design leaves no broken or bent stubs for easy
removal of undamaged forms
• Flush design permits simplified in-slab work
• Flush design leaves a neat, uncluttered job
• Offered in straight ES configuration for straight-through
conduit runs and mounting of floor boxes in slabs
over 6" thick
• Offered in ESL configuration to eliminate bending
of conduit in slabs over 4" thick
• Precision-cast and machined surfaces permit
safer wire pulling
• ZAMAK 3 Zinc can be embedded in concrete
Standard Material:
• Die-cast zinc alloy ZAMAK 3. Certified by the
Certified Zinc Alloy Plan (CZAP)
Standard Finish:
• Natural
Compliances:
• UL Listed
• CSA Certified
Sample Specifications:
• Concrete Slab Inserts shall be die-cast Zinc Alloy* ZAMAK
3.
All conduit stops shall be coined and free of rough
edges. Service Entrance Fittings shall be Red•Dot
®
Catalog No. _______________
* Certified by the American Die Casting Institute
and
Weatherproof Boxes, Covers and Conduit Bodies