Server User Manual

Chapter 3. Plug-in Implemented Server Functionality Reference
162
3.2.2. nsslapd-pluginPath
This attribute specifies the full path to the plug-in.
Plug-in Parameter Description
Entry DN cn=plug-in name, cn=plugins, cn=config
Valid Values Any valid path
Default Value None
Syntax DirectoryString
Example nsslapd-pluginPath: uid-plugin
3.2.3. nsslapd-pluginInitfunc
This attribute specifies the plug-in function to be initiated.
Plug-in Parameter Description
Entry DN cn=plug-in name, cn=plugins, cn=config
Valid Values Any valid plug-in function
Default Value None
Syntax DirectoryString
Example nsslapd-pluginInitfunc: NS7bitAttr_Init
3.2.4. nsslapd-pluginType
This attribute specifies the plug-in type. See Section 3.3.3, “nsslapd-plugin-depends-on-type” for
further information.
Plug-in Parameter Description
Entry DN cn=plug-in name, cn=plugins, cn=config
Valid Values Any valid plug-in type
Default Value None
Syntax DirectoryString
Example nsslapd-pluginType: preoperation
3.2.5. nsslapd-pluginEnabled
This attribute specifies whether the plug-in is enabled. This attribute can be changed over protocol but
will only take effect when the server is next restarted.
Plug-in Parameter Description
Entry DN cn=plug-in name, cn=plugins, cn=config
Valid Values on | off
Default Value on
Syntax DirectoryString