Server User Manual

Database Link Attributes under cn=config, cn=chaining database, cn=plugins, cn=config
197
Parameter Description
Entry DN cn=config, cn=chaining database, cn=plugins,
cn=config
Valid Values Any valid delay period in seconds
Default Value 60 seconds
Syntax Integer
Example nsMaxResponseDelay: 60
3.5.1.3. nsMaxTestResponseDelay
This error detection, performance-related attribute specifies the duration of the test issued by the
database link to check whether the remote server is responding. If a response from the remote server
is not returned before this period has passed, the database link assumes the remote server is down,
and the connection is not used for subsequent operations.
Parameter Description
Entry DN cn=config, cn=chaining database, cn=plugins,
cn=config
Valid Values Any valid delay period in seconds
Default Value 15 seconds
Syntax Integer
Example nsMaxTestResponseDelay: 15
3.5.1.4. nsTransmittedControls
This attribute, which can be both a global (and thus dynamic) configuration or an instance (that is,
cn=database link instance, cn=chaining database, cn=plugins, cn=config) configuration
attribute, allows the controls the database link forwards to be altered. The following controls are
forwarded by default by the database link:
• Managed DSA (OID: 2.16.840.1.113730.3.4.2)
• Virtual list view (VLV) (OID: 2.16.840.1.113730.3.4.9)
• Server side sorting (OID: 1.2.840.113556.1.4.473)
Parameter Description
Entry DN cn=config, cn=chaining database, cn=plugins,
cn=config
Valid Values Any valid OID or the above listed controls
forwarded by the database link
Default Value None
Syntax Integer
Example nsTransmittedControls: 1.2.840.113556.1.4.473