Server User Manual

cn=config
23
For example, to rotate audit log files every day at midnight, enable this attribute by setting its value to
on, and then set the values of the nsslapd-auditlog-logrotationsynchour and nsslapd-
auditlog-logrotationsyncmin attributes to 0.
Parameter Description
Entry DN cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsslapd-auditlog-logrotationsync-enabled: on
2.3.1.28. nsslapd-auditlog-logrotationsynchour (Audit Log Rotation Sync
Hour)
This attribute sets the hour of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and nsslapd-auditlog-
logrotationsyncmin attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 23
Default Value None (because nsslapd-auditlog-
logrotationsync-enabled is off)
Syntax Integer
Example nsslapd-auditlog-logrotationsynchour: 23
2.3.1.29. nsslapd-auditlog-logrotationsyncmin (Audit Log Rotation Sync
Minute)
This attribute sets the minute of the day for rotating audit logs. This attribute must be used in
conjunction with nsslapd-auditlog-logrotationsync-enabled and nsslapd-auditlog-
logrotationsynchour attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 59
Default Value None (because nsslapd-auditlog-
logrotationsync-enabled is off)
Syntax Integer
Example nsslapd-auditlog-logrotationsyncmin: 30
2.3.1.30. nsslapd-auditlog-logrotationtime (Audit Log Rotation Time)
This attribute sets the time between audit log file rotations. The audit log is rotated when this
time interval is up, regardless of the current size of the audit log. This attribute supplies only the