Server User Manual

cn=config
33
Parameter Description
Valid Range -1 (unlimited) | 1 to the maximum 32 bit integer
value (2147483647)
Default Value -1
Syntax Integer
Example nsslapd-errorlog-logminfreediskspace: -1
2.3.1.51. nsslapd-errorlog-logrotationsync-enabled (Error Log Rotation
Sync Enabled)
This attribute sets whether error log rotation is to be synchronized with a particular time of the day.
Synchronizing log rotation this way can generate log files at a specified time during a day, such as
midnight to midnight every day. This makes analysis of the log files much easier because they then
map directly to the calendar.
For error log rotation to be synchronized with time-of-day, this attribute must be enabled with the
nsslapd-errorlog-logrotationsynchour and nsslapd-errorlog-logrotationsyncmin
attribute values set to the hour and minute of the day for rotating log files.
For example, to rotate error log files every day at midnight, enable this attribute by setting its value to
on, and then set the values of the nsslapd-errorlog-logrotationsynchour and nsslapd-
errorlog-logrotationsyncmin attributes to 0.
Parameter Description
Entry DN cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsslapd-errorlog-logrotationsync-enabled: on
2.3.1.52. nsslapd-errorlog-logrotationsynchour (Error Log Rotation Sync
Hour)
This attribute sets the hour of the day for rotating error logs. This attribute must be used in
conjunction with nsslapd-errorlog-logrotationsync-enabled and nsslapd-errorlog-
logrotationsyncmin attributes.
Parameter Description
Entry DN cn=config
Valid Range 0 through 23
Default Value 0
Syntax Integer
Example nsslapd-errorlog-logrotationsynchour: 23