Server User Manual

cn=config
47
Parameter Description
Default Value 389
Syntax Integer
Example nsslapd-port: 389
NOTE
Set the port number to zero (0) to disable the LDAP port if the LDAPS port is enabled.
2.3.1.84. nsslapd-privatenamespaces
This read-only attribute contains the list of the private naming contexts cn=config, cn=schema, and
cn=monitor.
Parameter Description
Entry DN cn=config
Valid Values cn=config, cn=schema, and cn=monitor
Default Value
Syntax DirectoryString
Example nsslapd-privatenamespaces: cn=config
2.3.1.85. nsslapd-pwpolicy-local (Enable Subtree- and User-Level
Password Policy)
Turns fine-grained (subtree- and user-level) password policy on and off.
If this attribute has a value of off, all entries (except for cn=Directory Manager) in the directory
is subjected to the global password policy; the server ignores any defined subtree/user level password
policy.
If this attribute has a value of on, the server checks for password policies at the subtree- and user-
level and enforce those policies.
Parameter Description
Entry DN cn=config
Valid Values on | off
Default Value off
Syntax DirectoryString
Example nsslapd-pwpolicy-local: off
2.3.1.86. nsslapd-readonly (Read Only)
This attribute sets whether the whole server is in read-only mode, meaning that neither data in the
databases nor configuration information can be modified. Any attempt to modify a database in read-
only mode returns an error indicating that the server is unwilling to perform the operation.