Specifications
Table Of Contents
- Administration Guide
- Contents
- Introduction and System Requirements
- VMware Server Overview
- Features of VMware Server
- Support for 32-bit and 64-bit Guest Operating Systems
- Two-Way Virtual SMP (Experimental Support)
- Connect to VMware GSX Virtual Machines and Hosts
- Upgrade and Use GSX Virtual Machines
- Move Existing Virtual Machines
- Compatible with VMware Workstation 5.x Virtual Machines
- Configure Virtual Hardware Devices to be Automatically Detected
- Take and Revert to Snapshots in the Background
- Support for VMware Virtual Machine Importer
- Support for VirtualCenter
- APIs Included with VMware Server
- Before You Install the Release
- Host System Requirements
- Virtual Machine Specifications
- Virtual Processor
- Virtual Chipset
- Virtual BIOS
- Virtual Memory
- Virtual Graphics
- Virtual IDE Drives
- Virtual SCSI Devices
- Virtual PCI Slots
- Virtual Floppy Drives
- Virtual Serial (COM) Ports
- Virtual Parallel (LPT) Ports
- Virtual USB ports
- Virtual Keyboard
- Virtual Mouse and Drawing Tablets
- Virtual Ethernet Card
- Virtual Networking
- Virtual Sound Adapter
- Supported Guest Operating Systems
- Technical Support Resources
- Installing VMware Server
- Selecting Your Host System
- About the VMware Server Console on the Server
- Installing VMware Server on a Windows Host
- Installing VMware Server on a Linux Host
- Configuring Web Browsers for Use with VMware Server
- Installing the VMware Server Console
- Installing the VMware APIs
- Uninstalling VMware Server
- Migrating from GSX Server to VMware Server
- Preparing for the Migration
- Before You Install VMware Server
- Shut Down and Power Off All Virtual Machines
- Make Sure All Disks Are in the Same Mode
- Upgrading Virtual Machines with Disks in Undoable Mode
- Upgrading Virtual Machines with Multiple Virtual Disks
- Back Up Virtual Machines
- Take Note of Custom Network Configurations
- Remove Existing VMware Products
- Make the Virtual Machine Accessible to Its Users
- When You Remove a VMware Product and Install VMware Server
- Before You Install VMware Server
- Migrating to VMware Server on a Windows Host
- Migrating to VMware Server on a Linux Host
- Using Virtual Machines Created with VMware GSX Server
- Using Virtual Machines Created with Workstation 5.x
- Preparing for the Migration
- Managing Virtual Machines and the VMware Server Host
- Remotely Managing Virtual Machines
- Securing Virtual Machines and the Host
- Identifying a Virtual Machine by Its UUID
- Logging VMware Server Events on Windows
- Backing Up Virtual Machines and the VMware Server Host
- Using the VMware Management Interface
- Setting the Session Length for the VMware Management Interface
- Logging On to the VMware Management Interface
- Using the Status Monitor
- Viewing Summary Information About the VMware Server Host System
- Viewing Summary Information About Virtual Machines on the Host
- Using the Virtual Machine Menu
- Connecting to a Virtual Machine with the VMware Server Console
- Monitoring the Virtual Machine’s Heartbeat
- Viewing Information about a Virtual Machine
- Using Common Controls
- Configuring a Virtual Machine
- The Apache Server and the VMware Management Interface
- Logging Off the VMware Management Interface
- Deleting Virtual Machines
- Configuring the VMware Server Host
- Using VirtualCenter to Manage Virtual Machines
- Moving and Sharing Virtual Machines
- Performance Tuning and the VMware Server Host
- Using High-Availability Configurations
- Using SCSI Reservation to Share SCSI Disks with Virtual Machines
- Overview of Clustering with VMware Server
- Creating a Cluster in a Box
- Using Network Load Balancing with VMware Server
- Creating Two-Node Clusters Using Novell Clustering Services
- Clustering Using the iSCSI Protocol
- Mounting Virtual Disks
- Glossary
- Index
VMware, Inc. 127
Chapter 4 Managing Virtual Machines and the VMware Server Host
Creating Network Labels from the VMware Server Console
To!create!network!labels!for!virtual!machines!managed!by!VirtualCenter,!complete!the!
following!steps!in!a!console.
1 Connect!to!the!VMware!Server!host!with!a!console,!then!choose!Host!>!Settings.!
The!Host!Settings!dialog!box!appears.
2Click!the!Named!Networks!tab.
NOTE If!the!Named!Networks!tab!does!not!appear!in!the!Host!Settings!dialog!
box,!then!the!VMware!Server!host!has!not!been!discovered!by!
VirtualCenter.!For!information!about!adding!a!VMware!Server!host!to!
VirtualCenter,!see!your!VirtualCenter!documentation.
3To!add!a!label,!click!Add.!The!Add!Named!Network!dialog!box!appears.
4 Select!the!virtual!network!adapter!from!the!Adapter!list.!On!a!Windows!host,!if!an!
adapter!is!configured!for!bridged,!host‐only!or!NAT!networking,!its!networking!
type!is!indicated!next!to!the!
adapter!name.
5Enter!the!name!of!the!label!in!the!Label!entry!field.
6Click!OK!to!add!the!label,!then!click!OK!to!save!your!changes.
Creating Network Labels from the VMware Management Interface
To!create!network!labels!for!virtual!machines!managed!by!VirtualCenter,!complete!the!
following!steps!in!the!management!interface.
1Log!on!to!the!VMware!Management!Interface!as!the!Administrator!(VMware!
Server!for!Windows!hosts)!or!root!user!(VMware!Server!for!Linux!hosts).!For!
information,!see!“Logging!On!to!the!VMware!Management!Interface”!
on!page 99.
2On!the!Status!Monitor!page,!click!the!Options!tab.!The!Options!page!appears.