Product Manual

15 SYSTEM WIRING
15.1 WIRING PRECAUTIONS
• Ensure that all connections are made using REDARC recommended connectors and cables
or other suitably rated connectors and cables.
• Ensure that the total system current does not exceed the maximum current rating for either
the cables or any connectors that are subject to the total current of the system.
• Ensure that grounding and fusing is adequate and sound for the system.
• Ensure that all additional and or Non-Redarc Anderson™ plug terminals are soldered
correctly or crimped with the correct Anderson™ crimping tool.
• All cable entries into the vehicle or trailer must be suitably sealed.
• If the regulator has a dedicated solar input ground (negative) terminal, ensure that the
negative ground from the solar panels is connected directly to the regulator. Refer to the
manufacturer’s instructions.
• The SRC0009 Battery clip cable is intended for a portable short term connection, and is not
to be left connected permanently.
15.2 FUSE PROTECTION
Fuse protection is required for wire and component protection in case of short circuit.
Fuses must be fitted as close as possible to the battery positive terminal.
REDARC recommend using MIDI style bolt down fuses as they ensure a low resistance
connection. The REDARC FK40 and FK60 fuse kits are recommended.
Blade type fuses are not recommended as they can result in high resistance connection
which causes excess heat and may damage the fuse holder and/or the wiring.
Self-resetting circuit breakers are not recommended as they may trip prematurely due to
the heat generated by the current flowing through the wires.
16
13 SRPA20-VP - VALUE PACK
The SRPA20-VP offers a complete regulator and cable kit for a portable setup. The Anderson™
SB™50 plugs allow for simple plug and play connection allowing the panels to be positioned up
to 5m away from the regulator.
VALUE PACK CONTENTS
• SRPA0240 - 20A SRPA solar regulator
• SRC0009 - 1.5m Anderson to battery clip cable
• SRC0018 - 5m Anderson™ to Anderson™ plug cable
14 SRC0001-CK - MC4 CONNECTOR KIT
The SRC001-CK includes a male and female MC4 connector.
15