Product Manual

8
2 INSTALLATION
2.4 BROWN wire - Auxiliary Battery Positive
The BROWN wire should be connected to
the auxiliary battery’s positive terminal. This
should be a maximum of 1 metre in cable
length from the battery. Appropriate size fuses
should be used as per the specifi cations table
on page 2.
2.5 BLACK wire - Common Ground
The BLACK wire should be connected to a ground
point that is common to both the Start battery (or the
Solar Input Ground wire) and the Auxiliary battery to
be charged. This point may be on the chassis of the
vehicle, on the chassis of the trailer/camper/caravan
or directly wired to both batteries, depending on your
installation requirements.
2.6 GREEN wire - Optional External LED Indication
The GREEN wire is provided to optionally connect an
external indicator LED which can be mounted away
from the unit (for example on the vehicle’s dashboard).
Connect the positive lead of the LED to the green wire,
and the negative lead to the common ground. No
external resistors are required.
The External LED will be ON when the unit is charging
and OFF when the unit is in standby mode or has no
power. Note: This output is not suitable for running a
globe.
Brown Wire
Auxiliary
Battery
Fuse
Green Wire
Optional
LED
Black Wire