Full Product Manual
11
Operation
Before Operating
• Check that all parts of the chainsaw are rmly attached and
undamaged.
• Check that the chain tension is correct.
• Check that the chain brake functions.
• Check the chain lubrication.
• Check that there are no leaks.
• Never work on unstable ground!
• Never work above shoulder height!
• Never work while standing on a ladder!
• When working, always hold the power tool with both hands!
Switching the Chainsaw ON
Make certain that the saw chain has not yet been positioned for
cutting and is not touching any other objects. Hold the chainsaw
rmly with both hands (see Figure 9). Ensure that the chain brake
is released before starting the chainsaw (see Figure 10). To do this,
pull the hand guard back towards the handlebar.
Press and hold down the switch lock
1
(see Figure 11).
Press and hold the rear On/Off switch
2
.
Switching the Chainsaw OFF
Release the On/Off switch (see Figure 12).
After Operation
Always switch the motor off before you put the power tool down!
When the On/Off switch is released, the saw chain continues
running briey. Stop the motor. Wait until all rotating parts have
come to a standstill. Remove the battery. Activate the chain brake.
Place sheath on cutting mechanism. Leave power tool to cool
down.
Figure 10
Figure 11
Figure 12
Figure 9
1
2