Full Product Manual

6
Important Safety Information
Kickback
Kickback occurs when the tip of the guide rail touches an
object or when the saw chain becomes jammed in the cut. If the
rail tip touches an object, this may throw the guide rail upwards
and in the direction of the operator. If the saw chain jams on the
upper edge of the guide rail, the rail may quickly recoil in the
direction of the operator.
Kickback can be prevented by holding the saw rmly with both
hands, ensuring that your thumbs and ngers clasp the handles
on the chainsaw. Move your body and arms into a position in
which you can withstand the kickback force. Avoid an abnormal
body posture and do not saw above shoulder height.
Safety Icons
Safety icons are to remind you of important information while
you are operating the unit.
Safety Decals
Safety decals on the chainsaw are to remind you of important
information while you are operating the unit. Make sure all
decals are attached and in readable condition. Replace missing
or defaced decals. Contact Redback USA at 1-877-487-8275 for
replacement decals.
Use caution when operating this power
equipment.
A chainsaw has sharp blades. Use
caution when operating, transporting and
handling.
Wear protective noise deafening
headphones when operating.
Use caution around rotating parts!
Do not touch when operating.
!
Read and understand the Operation
Manual before operating the chainsaw.
A chainsaw has sharp blades. Use
caution when operating around other
people and pets.
Wear goggles or other eye protection.
The chainsaw can propel wood chips and
dust.
Avoid operating in the rain, protect
the battery and chainsaw from wet
conditions.
!
106958
WARNING
Drilling, sawing, sanding or machining wood
products can expose you to wood dust, a substance
known to the State of California to cause
cancer. Avoid inhaling wood dust or use a dust
mask or other safeguards for personal protection.
For more information go to
www.P65Warnings.ca.gov/wood.
!
108277