Specifications

10
3. SPECIAL TOOLS
Backpack Blower: EB4300/ 6200, EB70 Series, EBZ4800, EBZ51/ 71/ 80 Series
2. Set the stopper (special tool) into the plug hole.
3. Remove the four mount screws, then remove the
fan. The fan is detached but stays inside the volute
cover assembly and the volute case.
4. Remove the six mounting screws then remove the
engine short block from the volute case.
5. Remove the mounting nut using the box wrench.
6. Remove the rotor using the puller assy.
Rotor
Puller Assy.
Box Wrench
(12 mm)
Mounting Nut
(12 mm Hex)
Stopper
Fan
Mounting
Bolt
Volute Cover Assy.
Volute
Case
Mounting Bolt
Engine Short Block
Volute Case