Specifications

3. SPECIAL TOOLS

3-3 Recoil Pulley Removal

Description

Part Name

Part Number

Model

Stopper

4810-96220

Puller

4500-96100

Puller

848-8W0-0020

Wrench (HEX) 3304-97611

Size: 3/ 4/ 5 mm

Wrench (TORX) 2850-96410

Size: T20/ T25/ T27

HBZ26 Series

●

EBZ71/ 80 Series

●

Remove the recoil pulley using the puller (special tool) while preventing piston movement by setting the

stopper (special tool).

Examples of the puller (special tool) usages are shown according to the type of the puller.

Puller: 4500-96100 HBZ26 Series

1. Remove the recoil starter and the spark plug.

2. Insert the stopper (special tool) to the plug hole

(Refer to “3-1 Rotor Removal”).

3. Engage the puller (special tool) to 2 holes on the

pulley and pull out the pulley.

Note: Pulley screw is right turn screw.

Puller: 848-8W0-0020 EBZ71/ 80 Series

1. Remove the recoil starter and the spark plug.

2. Insert the stopper (special tool) to the plug hole

(Refer to “3-1 Rotor Removal”).

3. Extract the pulley while holding the pulley by the

puller's pins (special tool).

Note: Pulley screw is right turn screw.

Puller

Box Wrench

Pulley

Hole

Puller

Box Wrench

Pulley

Puller

Pulley