Specifications

16
3. SPECIAL TOOLS
Rod Assy: 3350-96230 EBZ30 Series, EB4300, EBZ4800, EBZ51 Series
1. Remove the engine short block (refer to “3-1 Rotor
Removal”) and then remove the cylinder.
2. Remove the snap rings from both sides of the
piston pin.
3. Insertion the rod assy (special tool) against the
piston pin and gently tap with a plastic hammer to
push out the pin.
Hard hammering may damage the big end of
the connecting rod.
Rod Assy: 2750-96230 EB6200, EB70 Series
1. Remove the engine short block (refer to “3-1 Rotor
Removal”) and then remove the cylinder.
2. Remove the snap ring from starter side of the
piston pin.
3. Rest the rod assembly against the end of the piston
pin and pull the piston pin out from the piston.
CAUTION
Rod assy.
Piston Pin
Piston
Rod Assy.
Piston Pin
Piston
Piston Pin
Snap Ring
(Don’t remove)
Snap Ring
(Remove)
Snap Ring
Rod Assy.