UK TITANIUM CONSOLE USER GUIDE TC2.0/TC3.0/TX2.0/TXF3.
TC2.0/TC3.0/TX2.0/TXF3.0 UK CONSOLE USER GUIDE TC2.0, TC3.0, TX2.0, TXF3.0 Computer Button operation DRIVE KNOB • Rotate the i-Drive knob to adjust the setting values or resistance, turn clockwise to increase and anticlockwise for decrease. • Press the i-Drive knob to confirm the value and move to the next step. A QUICK START Press to begin exercising immediately in manual mode. F B E C D START/STOP • Press to start a program.
TC2.0/TC3.0/TX2.0/TXF3.0 UK CONSOLE USER GUIDE GETTING STARTED USER PROFILE SETTING • When the power is switched on the computer will beep and the full screen display will be shown for 2 seconds (Figure 1). The computer will then enter the user profile setting mode (Figure 2). • If no use is detected for a period of 4 minutes the computer will switch off. Begin to pedal to turn back on. From Power on screen, rotate the i-Drive knob to select the user (U1, U2, U3, U4, U5) press to confirm selection.
TC2.0/TC3.0/TX2.0/TXF3.0 UK CONSOLE USER GUIDE PROGRAMS Select the desired program by rotating the i-Drive knob, the pre-set programs will display on the top of the screen, MANUAL PROGRAM FITNESS PERSONAL H.R. RANDOM Press the i-Drive knob to confirm selection. Set the target calories by rotating the i-Drive knob or press the i-Drive knob to skip target calories. After setting the target calories value, press the i-Drive knob to confirm. You can press the START button to start the exercise.
TC2.0/TC3.0/TX2.0/TXF3.0 UK CONSOLE USER GUIDE 1. In the PROGRAM mode the pre-set target time, target distance and target calories will countdown display until the first one reaches 0. Any values not inputted will count up from 0. FITNESS 2. When user adjusts the resistance level during the exercise the adjustment will apply to the entire program, the remaining segments of the program will all be increased by one resistance level.
TC2.0/TC3.0/TX2.0/TXF3.0 UK CONSOLE USER GUIDE Follow these instructions for all segments, once complete press and hold the i-Drive for 3 seconds to save. You will then enter the target time setting mode. • Target TIME: • Target DISTANCE: • Target CALORIES: If required, these are set as per the previous instructions in the manual mode. In the PROGRAM mode the pre-set target time, target distance and target calories will countdown display until the first one reaches 0.
TC2.0/TC3.0/TX2.0/TXF3.
TC2.0/TC3.0/TX2.0/TXF3.0 CONSOLE USER GUIDE notes Console Set Up Overview PART DISPLAY WINDOW DISPLAY RANGE SAVE 1 SEX F/M Yes 2 AGE 10 - 100 Yes 3 WEIGHT 20 - 330(Lb) 10 - 150(KG) Yes 4 HEIGHT 36 - 84(INCH) 90 – 210(CM) Yes 5 TIME 0:00 - 99:59 No 6 DISTANCE 0.0 - 99.99 No 7 CALORIES 0 - 999 No 8 SpEED 0.0 - 99.
reebokfitnessequipment.
