User Manual

Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: [phone]
Customer Service: 855-634-9109 • [e-mail] • www.reelcraft.com
Form# 1164-205 Rev: 5/2013
Read this manual carefully before installing, operating or
servicing this equipment.
IMPORTANT
Four 1/2” diameter mounting holes
Dimensions
A B C D
CA30106-CS
6” 9 3/4” 11” 16”
CA30112-CS
12” 15 3/4” 17” 22”
CA30106-CS CA30112-CS
Series 30000-CS Hand Crank Cord Reels
Cable Storage Model Numbers:
INSPECTION
Unpack and inspect reel for damage. Turn the reel by hand to check for
smooth operation.
OPERATIONAL INSTRUCTIONS
WARNING:
Power source must be disconnected before winding or
unwinding cord back onto reel.
INSTALLATION INSTRUCTIONS
NOTE:
Install on flat surfaces to prevent reel from binding.
1. Two 1/2” diameter mounting holes are located at the base of each
side support panel (2 each). Mount reel using four customer sup-
plied bolts. Tighten bolts securely to ensure a solid, rigid attach-
ment. (See figure 1)
2. Inlet cord length may be adjusted by loosening clamp and pushing
desired length thru shaft. After cable is on reel, push excess inlet
cord into shaft for storage. (See figure 2)
Figure 1
Figure 2