Instructions

36
g) Trimming the Helicopter
Pushthepitchlever(seegure1,item5)carefullyforwardandobservetheresponseofyourmodel.Shortlybeforethe
helicopter starts hovering, you can already determine in which direction your model wants to move.
If the helicopter fuselage tip tries to turn to the right, reduce the speed and turn the trimming controller for the tail
function(seegure1,item4)graduallytotheleft.
Pushthepitchstickcarefullyforwardandcheckiftheadjustmentwassufcient.Keeprepeatingthisprocedureuntil
the helicopter no longer has any tendency to turn to the right.
If the tip of the fuselage turns to the left, carry out a right trim adjustment.
Figure 12