Instructions

42
• Remove the battery to be charged out of the model. Before charging, disconnect the battery completely
from the speed controller.
• Place the charger and battery on a heat-resistant, non-combustible surface.
• Chargerandbatterywillheatupduringcharging.Therefore,keepsufcientdistancebetweenthecharg-
erandthebattery;neverplacethebatteryonthecharger.Nevercoverthechargerorthebattery.Donot
exposechargerandbatteriestohigh/lowtemperaturesanddirectsunlight.
• Never charge the batteries unattended.
• Charge the batterys regularly (about every 2 - 3 months), since otherwise, a deep discharge of the bat-
tery may occur sue to self-discharge. As a result, the batteries will become unusable!
NiMHbatteries(exceptspecialtypeswithlowself-discharge)losetheirenergywithinafewweeks.
LiPo batteries retain their power normally for several months, but may get permanently damaged due to
deep discharge and cannot be used any longer.
• Neveruseachargingcurrentthatistoohigh;observethemanufacturer‘sinformationabouttheidealor
maximumchargingcurrent.
• Disconnect the battery from the charger when it is fully charged.
• Chargers and batteries must not get damp or wet. There is risk of a fatal electric shock, and also the risk
ofreandexplosionposedbythebattery!
Especially the batterys with lithium technology (e.g. LiPo batteries) are very sensitive to the moisture due
to the chemicals contained therein!