User manual

ManualsBrandsREELY ManualsDronesMercury V2.0 VR FPV Quadcopter RtF Camera drone

5 6 7 8

HOW TO FLY

*When the drone is rst engaged with the smartphone, there will be no control from regular controller.

DOWN

FORWARD

BACKWARD

LEFT RIGHT

BACKWARD

ROTATE

LEFT

ROTATE

RIGHT

ROTATE LEFT

ROTATE RIGHT

CORRECTING DRIFT

It is normal for the drone to drift slightly. However if it drifts in any direction consistently press the trim button opposite

the movement as many times as needed to eliminate the drift.

FORWARD TRIM

BACKWARD TRIM

LEFT

TRIM

LEFT

TRIM

RIGHT

TRIM

RIGHT

TRIM

TO FLIP IN THE AIR

Press the right stick and push it ip to the direction!

HEADLESS MODE

Intended for beginner pilots. For best results, always face toward the drone while ying.

Press the headless button to turn on HEADLESS mode. Press again to turn off HEADLESS

mode. While in HEADLESS Mode, the path of the drone will always follow control stick

input direction relative to the pilot location, regardless of the direction the model is pointing.

For proper control ensure that the drone is facing in the same direction as the pilot when

engaging HEADLESS mode, failure to do will cause unexpected results.

NOTE: To make sure the digital compass works

on the HEADLESS mode. It is required to have

the drone head and the transmitter antenna

perpendicular in the same straight line when

pairing the two devices.

HEADLESS

AUTO-HOVER

Designed for LIVE stream First Person View - both of

controller clip and Wonderlen VR mode. This function requires

to set the Mercury VR drone at certain height and press the

auto-hover button to hold the altitude.

NOTE: When the drone gets to hold the altitude, it could be

slightly drifting around. Please make sure there is enough

space for the auto-hover y tolerance and trim the drone to

its best performance.

Auto-hover

CLIP ON CONTROLLER FPV

Please use your iOS/Android smartphone & search for the app ‘VR Drone’ on the iOS app store or Android

google play store. Download it, and install it. Read carefully the instruction from the app on how to make the

WiFi connection and controllings.

Plug-in the clip on the

transmitter antenna

Clip the smartphone Connect the Mercury with

the transmitter and the

smartphone before y

GET TO DO VIRTUAL REALITY

Set your iOS phone or Android phone into the insert plate of the

Wonderlen VR goggle. Make sure the phone is steadily clipped and

VR mode screen aligned with the central mark. The maximum size of

the smart device applicable for the goggle is 158mm x 78mm.

NOTE: It is strongly recommended to learn how to y

a drone before you start the very exciting VR mode

y as it requires certain skill of controlling the drone

while doing the virtual reality First Person View.

Start the app ‘VR Drone’ and click VR button for VR mode y. The camera will begin to record video

during the VR mode y.

ADJUST THE GOGGLE LENS

Adjust

the pupilary distance

Adjust

the pupilary distance

Adjust the focal distance

NOTE: To have the best performance

of the VR view, please adjust the

lenses on both of the pupilary and

focal distance to the best condition.

Always keep the lenses clean!

REPLACEMENT BLADES

FRONT

REAR

* Please unscrew the screw for the blade before replace the blade.

LAND SAFELY

When the battery voltage begins to run low, the four major LEDs will begin to ash very FAST.

It is time to land before the built-in low voltage cut-off reduces power to the motors.

TROUBLE SHOOTINGS

PROBLEM: Controller cannot be linked to the Mercury VR drone.

SOLUTION: Throttle position needs to be at zero.

PROBLEM: Controller LED ashing FAST after binding.

SOLUTION: Replace batteries.

PROBLEM: Mercury VR drone’s shaking.

SOLUTION: Check if the frames and rotors are damaged.

PROBLEM: Will not take off.

SOLUTION: Check that the rotor blades are properly installed.

PROBLEM: Can’t sync the drone to the smart device.

SOLUTION: Check the app is downloaded, light of the camera module is on, the smart device’s Wi-Fi is turned on,

the drone is within operating range, power is not low, no interference from other device and the device is

compatible with Android 4.0 & later or iOS 6.0 & later.

iPad, iPhone and iPod touch are trademarks of Apple Inc., registered

in the U.S. and other countries.

App Store is a service mark of Apple Inc.

Android is a trademark of Google Inc.

Google Play is a trademark of Google Inc.

Wi-Fi and Wi-Fi logo are registered trademarks of the Wi-Fi Alliance. MADE IN CHINA

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data processing systems

require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing.