User manual
Motor-Sound-Simulator
Item No. 1406780
Intended Use
The product is used to generate motor sounds in electrically operated model vehicles. The
voltage/power supply takes place via an interim plug directly from the vehicle's drive battery.
The safety notes and all other information in these operating instructions always have to be
observed.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Scope of Delivery
• Motorsoundsimulator
• CablewithTamiyainterimplugandBECconnection
• 2adhesivepads
• OperatingInstructions
Current operating instructions:
1.Openwww.conrad.com/downloadsinabrowserorscan
the QR-code shown on the right.
2.Selectthedocumenttypeandlanguage,andthenenter
thecorrespondingordernumberinthesearcheld.After
searchingstarts,youcandownloadthedocumentsfound.
Safety Information
In case of damage caused by non-compliance with these operating instruc-
tions, the warranty/guarantee will expire. We do not assume any liability for
consequential damage!
We do not assume any liability for property damage and personal injury caused
by improper use or non-compliance with the safety instructions. In such cases
the guarantee/warranty will expire!
• Theunauthorizedconversionand/ormodicationoftheproductisprohibitedforsafetyand
approvalreasons(CE).
• Thisproductisnotatoyandmustbekeptoutofthereachofchildren!
• Theproductmustnotbecomedamporwet.
• Too-highvolumesmaycausedamagetothehearingofhumansandanimals.Keepsufcient
distance from the speaker when testing and in operation.
• Donotleavethepackagingmateriallyingaroundcarelesslyasitcanbecomeadangerous
toy for children.
• Ifyouhavequestionswhichremainunansweredintheseoperatinginstructions,pleasecon-
tact us or another expert.
Installation
The motor sound simulator must be installed in the vehicle so that it will remain safely in place
whendriving.Thehousingcanbeattached,e.g.withdouble-sidedadhesivetapeorcableties.
Observetheexampleinstallationinthefollowinggure.
Wheninstalling,ensurethattheopeningsofthespeakerarenotcovered.Ensuresufcient
cooling,sincetheelectronicswillheatupathighervolumes.
1 Motorsoundsimulator
2 BECsocket
3 Tamiyasocket(connecttothespeedcontroller)
4 Tamiyaplug(connecttothedrivebattery)
5 Servoplugforconnectiontothereceiver
6 Servoconnectionsocketforcontrolcabletothespeedcontroller
7 BECplug
8 Volume button
Connection
Forpowersupplyofthemotorsoundsimulator,atwo-polecablewithBECconnection(2)is
routedoutofthehousing.ConnectthisconnectiontotheBECplug(7)oftheenclosedinterim
plug cable.
Connectthehigh-currentconnectionofthespeedcontrollertotheTamiyasocket(3)ofthe
interim plug cable.
The servo-Y-cable of the motor sound simulator is connected to the control cable of the speed
controlleraswellastheassociatedreceiveroutput.Theplug(5)belongsinthereceiver.The
speedcontrollerisconnectedtothesocket(6).Ensurecorrectpolarityoftheplugsforthis.
Theservoplug(5)isconnectedtothechannelofthereceivertowhichthespeedcontroller
was previously connected.
Last,thedrivebatteryisconnectedtotheTamiyaplug(4).
Functional Description
Themotorsoundsimulatorisconnecteddirectlytothereceiveroutput,whichisalsousedfor
thespeedcontroller,viaaYcable.Themotorsoundisputoutaccordingtothethrottleposition
for the speed controller.
Thisway,themotorsoundisputoutaccordingly,sothatstarter,idleoraccelerationandfull
throttle sounds are possible.
The motor sound simulation starts when you tap the lever for the motor control (throttle/brake
lever)ofyourtransmitterbriey(intheforwarddrivingdirection).
The button "+" increases the volume step by step. The button "-" reduces the volume step by
step.Inthelowestsetting,theinstalledspeakerisswitchedoff.
The motor sound simulator is supplied with power from the drive battery used via an interim
plug due to the required power intake.
Version 01/16
Operating instructions
www.conrad.com