User manual

Programming the neutral position and full throttle position
Forthemotorsoundtobeproperlyoutput,theneutralpositionandthefullthrottlepositionsfor
forward and reverse driving can be programmed at the motor sound simulator.
Attention!
 Whenprogramming,transmittermustbemovedtothefullthrottlepositionsforfor-
ward and reverse driving respectively.
 Toavoidaccidentsorinjury,themodelmustthereforebeputonsuitablegroundso
thatthewheelscanspinfreely.Holdthemodelorfastenitsuitably.Donotreachinto
thedrive,however!
 For reasons of safety, we recommend disconnecting the motor from the speed
controller(rememberthealignmentoftheplugs).Withthemotordisconnected,the
sound signals of the motor sound simulator can also be heard better during program-
ming.
Proceed as follows for programming:
• Switchonthetransmitter.Thenconnectthedrivebatterytothevehicle.Switchonthespeed
controller. The vehicle should now react to the control signals of the transmitter (speed con-
troller/steeringservo).
• Keepthebutton"+"atthemotorsoundsimulatorpushedformorethan1seconduntilthemo-
tor sound simulator emits a beep. The motor sound simulator is now in programming mode.
Release the button "+" again.
• Ensurethattheleverforthemotorcontrolfunctionatthetransmitterisintheneutralposition
(releasethelever,donotmoveit).
 Conrmthissettingbypushingthebutton"+"atthemotorsoundsimulatorbriey.Themotor
sound simulator emits a beep. The neutral position is now saved.
• Movetheleverforthemotorcontroltothefullthrottlepositionfordrivingforwardandholdit
in this position.
 Conrmthissettingbypushingthebutton"+"brieyoncemore.Themotorsoundsimulator
emits a beep.
• Movetheleverforthemotorcontroltothefullthrottlepositionforreversingandholditinthis
position.
 Conrmthissettingbypushingthebutton"+"briey.Thesoundsimulatoremitsabeep.
• Theprogrammingisconrmedbyalongbeep.
• Puttheleverforthemotorcontrolbacktotheneutralposition(releasethelever).Program-
ming is complete.
 Ifthesoundsimulatorbeepsseveraltimes,theelectronicsystemhasnotrecognised
thesetting.Inthatcase,repeattheaboveprogrammingprocess.
The programming can be cancelled if you keep the button "-" pushed for a longer
durationduringprogramming.Thisissignalledbyalongbeep.Programmingmode
is completed.
• Ifthemotorhasbeendisconnectedforprogramming,switchoffthespeedcontrollerrst.
Thenconnectthemotortothespeedcontroller(ensureproperassignmentoftheplugs).
Checking the function of the motor sound simulator
• Afterswitchingonthespeedcontroller,nomotorsoundofthemotorsoundsimulatorcanbe
heard.Onlywhenyoutapthethrottle/brakeleverintheforwarddrivingdirectionalittlewilla
startersoundappear,followedbyanidlesound.
• Whenmovingthethrottle/brakeleveratthetransmitterintheforwarddrivingdirection,the
motor sound will correspond to that of an accelerating vehicle.
• Ifyoumovethethrottle-brakeleveratthetransmitterinthereversingdirection,aslightly
changedmotorsoundwillbeoutput(asinaregularcar).
• Ifapplicable,usethebutton"+"or"-"toadjustvolume.
 Ifthemotorsounddeviatesfromtheabovedescription,re-programme.
 Ifthemotorsoundsimulatorbeepsseveraltimes,theelectronicsystemhasnotrec-
ognised the setting. Repeat programming in that case.
Disposal
a) General Information
The product does not belong in the household waste.
 Disposeoftheproductaccordingtotheapplicablestatutoryprovisionsattheendof
its service life.
b) Batteries and Rechargeable Batteries
Youastheenduserarerequiredbylaw(BatteryOrdinance)toreturnallusedbatteries/re-
chargeablebatteries.Disposingoftheminthehouseholdwasteisprohibited!
 Batteriesandrechargeablebatteriescontaininghazardoussubstancesaremarked
with the adjacent symbol to indicate that disposal in the household waste is prohibit-
ed.Thedescriptionsfortherespectiveheavymetalsare:Cd=cadmium,Hg=mercury,
Pb=lead(thenamesareindicatedonthebattery/rechargeablebatterye.g.belowthe
rubbishbinsymbolshowntotheleft).
Youmayreturnusedbatteries/rechargeablebatteriesfreeofchargeattheofcialcollection
pointsinyourcommunity,inourstores,orwhereverbatteries/rechargeablebatteriesaresold.
Youthusfullyourstatutoryobligationsandcontributetotheprotectionoftheenvironment.
Technical Data
Operatingvoltage .................................5.0V/DCto8.4V/DC(2-cellLiPodrivebatteryor6-cell
NiMHdrivebattery)
Powerconsumption ..............................Max.approx.1A
Speakerimpedance ..............................4Ohm
Output ................................................... Max.6W(with2-cellLiPodrivebatteryat8V)
Servoplugsystem ................................Futaba build
Rechargeable battery plug system .......Tamiya build
Dimensions(LxWxH) ........................90x39x28mm
Weight ..................................................Approx. 60 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.