Installation Guide

ManualsBrandsReese Towpower ManualsTools & HardwareNissan Pathfinder and Infiniti QX4 Class III Custom Fit Hitch

Installation Instructions

Nissan Pathfinder

Infiniti QX4

Part Numbers:

51046

Hitch Shown In Proper Position

Equipment Required:

Wrenches: 17mm

Drill Bits: None

Frame rail

1. Remove tow hooks from each frame rail.

2. Raise hitch into position and insert fasteners as shown above.

3. Return fasteners and tow hooks to vehicle owner.

Rev. C10-16-09N51046Sheet 1 of 1

z 2001, 2003, 2006, 2009 Cequent Performance Products

Conical Washer 1/2Qty. (8)

Hex Bolt M12 X 1.25 X 35Qty. (8)

Tighten all M12 CL8.8 fasteners with torque wrench to 68 Lb.-Ft. (92 N*M)

Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to

prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working

beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.

This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5

and SAE J684.

Fastener Kit: K51046

Do Not Exceed Lower of Towing Vehicle

Manufacturer’s Rating or

500 (227 Kg)5000 (2270 Kg)

Weight Carrying

Ball Mount

550 (250 Kg)5500 (2497 Kg)

Weight Distributing

Max Tongue

WT (LB)

Max Gross

Trailer WT (LB)

Hitch type

Wiring Access Location: SUV1, SUV2

Form: F205 Rev A 5-6-05

Bumper