User Manual-Dual litering

ManualsBrandsReflecmedia ManualsContinuous Lighting7.0 x 12' Wideshot All In One Bundle with Medium Dual LiteRing

www.reflecmedia.com

Reflecmedia User Guide

Dual LiteRing Controller

Introduction

The Reflecmedia Dual LiteRing Controller is designed specifically for the Reflecmedia Dual LiteRing

& allows the user total control over the power source and litering output.

The Reflec media Dual LiteRing must ALWAYS be powered & controlled with the Reflecmedia Dual

LiteRing Controller. Other controllers may damage the LiteRing and invalidate product Warranty.

Toggle switch Intensity buttons

3 pin XLR – to LiteRing

Indicator LEDs

LCD display 4 pin XLR – DC power

Battery holder

Stainless steel pin either side to attach belt loops

Summary of content (6 pages)

PAGE 1
Reflecmedia User Guide Dual LiteRing Controller Introduction The Reflecmedia Dual LiteRing Controller is designed specifically for the Reflecmedia Dual LiteRing & allows the user total control over the power source and litering output. The Reflec media Dual LiteRing must ALWAYS be powered & controlled with the Reflecmedia Dual LiteRing Controller. Other controllers may damage the LiteRing and invalidate product Warranty.
PAGE 2
Connecting the Dual LiteRing to the Dual LiteRing Controller The LiteRing is fitted with a 3 pin XLR plug on the end of a flying lead. Insert this into the 3 pin XLR socket on the LiteRing Controller, ensuring that the plug is latched to prevent accidental removal. Always connect the LiteRing to the LiteRing Controller before connecting power or switching the controller on. Once connected, always stow any excess cable neatly.
PAGE 3
Battery holder SONY NP-F Mini DV type Battery attached To remove the battery, ensure that he controller is switched off (i.e. toggle switch in the centre-off position), depress the locking tab and slide the battery out of its holder. The ‘default’ supply is from the XLR / mains input. If the mains input AND battery are connected then the unit will automatically run from the XLR / mains input.
PAGE 4
The ‘UP’ arrow increases the LiteRing intensity; the ‘DOWN’ arrow decreases the LiteRing intensity. UP = Increase LiteRing intensity DOWN = Blue LiteRing intensity The light output can be very finely controlled in 256 discreet steps (i.e. values of 0 to 255). The chosen output level is shown on the upper left of the LCD display, along with an approximation of the output as a % (0 – 100%) on the upper right.
PAGE 5
Further user information Caution The Dual LiteRing, Dual LiteRing Controller and Reflecmedia mains power supply contain sensitive electronic components. For your own safety and to ensure reliable operation of the products, never open, modify or tamper with the product in any way. Opening, modifying or tampering with Reflecmedia products in any way will invalidate the product warranty. Never use the Dual LiteRing, Dual LiteRing Controller and Reflecmedia mains power supply with any other product.
PAGE 6
Specifications Model: Reflecmedia Dual Litering Controller Part number: RM4251D Use: For use only in photographic/film studios and similar locations under reliable supervision Manufacturer: Reflecmedia Ltd Manufacturing location: UK Electrical input: 7.5 – 12VDC 4 pin XLR. Pin 1 0V, Pin 4 +V 7.5Vdc via SONY NP-F MDV battery mount Electrical output: Max 0.45A, 22.1VDC Max overall power consumption: 12W maximum Electric insulation class: III Environmental rating: IP30, Dry locations.