Installation manual

10
Regency Plateau™ PTO30 Outdoor Gas Fireplace
INSTALLATION
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
Each Kit contains one LP Conversion Kit
Conversion Kit # 377-968 Contains:
Qty. Part # Description
1 904-655 Burner Orifi ce #45
1 904-529 5/32" Allen Key
1 918-590 Decal "Converted
to LPG"
1 908-528 Red "LP / ULPG" label
1 911-009 Hi/Lo conversion LP / ULPG For 886
1 919-127 Instruction Sheet
6) Pull off the pilot cap to expose the pilot orifi ce. Using a 5/32" allen key,
remove pilot orifi ce and replace with LPG/ULPG pilot orifi ce.
5) Remove burner orifi ce with a 1/2" wrench. Use another wrench to hold on
to the elbow behind the orifi ce. Discard orifi ce.
Repeat steps to install LPG/ULPG orifi ce.
7) Re-install pilot cap.
8) Adjust aeration accordingly.- see manual for details.
Remove table top(if installed) by lifting up and off, use caution if glass
surround is in place.
Remove glass crystals, garden stones and log set, if installed.
Locate and remove 2 screws at each end of burner assembly - see loca-
t
ions in Diagram 1 below.
Slide burner away from burner orifi ce and lift up to remove burner
assembly.
r
n the unit off and allow to cool to room temperature.
r
n off gas supply.
Pilot Cap
Burner orifi ce
CONVERSION FROM NG TO LPG/ULPG