User`s guide
Page 18
Maintenance & Storage
Replace the batteries using the procedure described on page 9. If the instrument is
not to be operated for an extended period of time, remove both batteries. This will
avoid possible damage to the instrument due to battery leakage
Attachment Screw
The attachment screw, located on the underside of the instrument, is used to protect
the sensitive electronics against intrusion and should be removed only by the
manufacturer.
Note: Removal of the Attachment Screw will void the warranty.
Specications
Dimensions 7 1/4” X 1” X 7/8”
Weight 59.4g (2.1 oz.)
Range of Measurement 5 - 80 mmHg
Power Source 3V Lithium Manganese Dioxide Batteries (QTY 2)
Symbols
ATTENTION, SEE INSTRUCTIONS FOR USE
CATALOG NUMBER
SN SERIAL NUMBER
DATE OF MANUFACTURE
LOT NUMBER
WASTE OF ELECTRICAL AND ELECTRONIC EQUIPMENT
SYMBOLS FOR OCU-FILM ONLY
DO NOT REUSE. SINGLE USE
USE BY