User`s guide

230750-101, Rev. C. 15
TONO-PEN AVIA VET Tonometer Preparation
Allow the instrument to thermally stabilize to room 1.
temperature for approximately 30 minutes prior to use.
Remove the storage OCU-FILM tip cover from the tip. 2.
Visually inspect the tonometer’s sensor for cracks, chips 3.
or other irregularities. Do not use if these conditions
are present.
Place a new OCU-FILM tip cover over the tip until the ridge 4.
is seated, taking care not to apply the tip cover too tightly
or too loosely
.
Figure 3. TONO-PEN AVIA VET Tonometer Preparation