SDS

SAFETY DATA SHEET
NOTE: ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-2004 format. This product has been classified in
accordance with the hazard criteria of the CPR and the MSDS contains all the information required by the CPR, EU Directives a nd the Japanese
Industrial Standard JIS Z 7250: 2000.
See Section 2 for full text of Ingredient Risk Phrases and Safety Phrases
Contaminated individuals of chemical exposure must be taken for medical attention if any adverse effect occurs. Rescuers sho uld be
taken for medical attention, if necessary. Take copy of label and MSDS to health professional with contaminated individual.
If this product contacts the eyes, immediately flush the eyes with large amounts of water. Get
medical attention if irritation occurs.
Wash the affected areas with soap and water. Remove contaminated clothing. If irritation occurs
seek medical attention.
If large amounts of this product are inhaled or if breathing difficulties occur. Move the exposed
person to fresh air at once. If breathing continues to be difficult or has stopped, perform artificial
respiration. Get medical attention immediately.
If this product has been swallowed. Do induce vomiting. Seek medical attention immediately.
EYE CONTACT:
SKIN CONTACT:
INHALATION:
INGESTION:
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Pre-existing skin problems may be aggravated by prolonged
contact.
TO PHYSICIANS: Treat symptoms and eliminate overexposure.
FLASH POINT: > 200
°
F C)
NFPA RATING
AUTOIGNITION TEMPERATURE: Not Established
FLAMMABLE LIMITS (in air by volume, %): Not Established
FIRE EXTINGUISHING MATERIALS: Suitable for surrounding area
UNUSUAL FIRE AND EXPLOSION HAZARDS: None Known
Explosion Sensitivity to Mechanical Impact: Not Sensitive
1
Explosion Sensitivity to Static Discharge: Not Sensitive
0
1
SPECIAL FIRE-FIGHTING PROCEDURES: Incipient fire responders
HEALTH
should wear eye protection. Structural firefighters must wear Self-
Contained Breathing Apparatus and full protective equipment. Isolate
materials not yet involved in the fire and protect personnel. Move
containers from fire area if this can be done without risk; otherwise, cool
with carefully applied water spray. If possible, prevent runoff water from
entering storm drains, bodies of water, or other environmentally sensitive
!
areas.
--
OTHER
Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate
3 = Serious 4 = Severe
SPILL AND LEAK RESPONSE: Proper protective equipment should be used. Personnel should be trained for spill
response operations.
Spills: Absorb spilled material using polypads or other suitable absorbent material. Avoid generating mists or sprays.
Place all spill residue in an appropriate container and seal. Dispose of in accordance with applicable Federal, State, and local
procedures (see Section 13, Disposal Considerations). Dispose of recovered material and report spill per regulatory
requirements.
WORK PRACTICES AND HYGIENE PRACTICES: As with all chemicals, avoid getting this product ON YOU or IN YOU. Wash
thoroughly after handling this product. Do not eat, drink, smoke, or apply cosmetics while handling this product. Avoid
breathing mists or sprays generated by this product. Use in a well-ventilated location. Remove contaminated clothing after
use.
STORAGE AND HANDLING PRACTICES: Store product in a cool location but avoid freezing. Protect from physical damage.
Page 2 of 6
7. HANDLING and STORAGE
6. ACCIDENTAL RELEASE MEASURES
5. FIRE-FIGHTING MEASURES
4. FIRST-AID MEASURES
!
!
!
!
!
!