Installation Guide

BARN DOOR HARDWARE KIT
STRAIGHT STRAP
BD100K-07800
INSTALLATION GUIDE
Step 14. Stopper Installation
Slide the door closed and to correct position of both
stoppers. Using the provided Allen key, tighten into position
to complete the installation of the Barn Door Kit.
1" (25.4mm)
1/8" (4mm)
x2 Floor-Mounted Bottom Guides
x4 #8 5/8 Pan Head Phillips Screws
Step 13. OPTIONAL Floor-Mounted Door Guide Installation
Line up close to the opening, position both the oor-mounted
door guides to allow the door to travel side-to-side on both
sides of the door. Screw into place directly into the oor.