Installation Guide

Step 14. Stopper Installation

Slide the door closed and to correct position of both stoppers.

Using the provided Allen key, tighten into position to complete

the installation of the Barn Door Kit.

(X2)

1" (25.4mm)

1/8" (4mm)

x2 Floor-Mounted Bottom Guides

x4 #8 5/8 Pan Head Phillips Screws

Step 13. OPTIONAL Floor-Mounted Door Guides

Installation

Line up close to the opening, position both the oor-mounted

door guides to allow the door to travel side-to-side on both

sides of the door. Screw into place directly into the oor.

NOTE: Measure correctly for 1 3/8” or 1 3/4” thick doors

for smooth opening and closing operation.

renincorp.com

873468

Version 02

BD102K-07800 / BD102K-09600 INSTALLATION GUIDE

BARN DOOR HARDWARE BENT STRAP KIT