Use and Care Manual

Digital Steam Press Instruction Manual
Page9
STEP 7 - FINISHING PRESSING/STORING THE UNIT
1. Water left in the reservoir will not drip out if the machine is stored in an
upright position. However, it is recommended that if the machine will be
stored for some time, that all the water in the unit should be drained by
pressing the Steam Burst Button until all of the water is pumped out.
2. Press the *POWER* button, the Red [Power] Light will go out. Disconnect
the plug from the outlet. Leave appliance in open position.
3. Wait for the Steam Press to cool completely (approximately 30 minutes).
4. When cool, lower the Pressing Plate onto the Ironing Board pushing the
handle to its lowest position.
5. Turn the Locking Knob to the locked position. This should prevent the
Steam Press from opening while being moved or stored.
6. Loosely wrap the electric cord and place it in the opening at the front of the
base of the Ironing Board. You are now ready to store the unit.