Use and Care Manual

Digital Steam Press Instruction Manual
Page16
PROBLEM CAUSE SOLUTION
No Steam. Water Level is too low. Fill the water tank.
Controls have not been properly set. If suitable for the fabric, make a selection to a
higher temperature. Wait for the Steam Ready Light
to come on.
Water drips from the Pressing
Plate.
Steam Button has been pressed too long. Don t press the Steam Button for more than 5
seconds continuously.
The Pressing Handle will not
move into the Automatic
Maximum pressure position.
Item on the Ironing Board is too thick to
use this pressure.
Use lighter pressure on thicker items. Use added
steam for wrinkles.