Specifications

11
Note 2: This process will only remove the group devices from its
assigned group but will not exclude it from the network.
Group Operation
After adding devices to your Z-URC
TM
550EU using XpressZetup
TM
,
you can turn the device on/off or up/down via the corresponding group
control keys in front (Figure 3).
• For on/off switches, press key to turn on the devices and
key to turn them off. (use to extend 16 groups On/Off)
• To operate dimmer switches and curtain motors, hold the key
to open the curtain or dim up the light. By holding the key you
can retract the curtain or dim down the light.
• You can turn on all the devices in the network by pressing All-On
key and turn them off via All-Off key.
• The green “OK＂ LED flashes when the operation is successful,
and the red ERROR LED flashes when it’s failed.
Figure 3 Group Control Keys of the Z-URC
TM
550EU
By Advance Setup Process
(For advanced users to get the full flexibility offered by the Z-URC
TM
550EU)
The Z-URC
TM
550EU remote is able to be set up with different
concepts such as Group, Scene, Association Group and Network.
These concepts are all setup on the underside of your Z-URC
TM
550EU
and operated with the corresponding number on the topside of the
remote.
Group
Control Keys
All On/Off
Keys