Specifications

• “LED_A＂ flashes

slowly

Select a scene number

from 1 to 16 (1-8 or

1-8)

• “OK＂ LED flashes

once then turns off

• “LED_A＂ off

• Scene deleted from the

scene successfully

Note 1: This process will only remove the scene devices/EPs from its

assigned scene but will not exclude it from the network.

Scene Operation

After the scene setup is done, you can trigger the desired scene via

scene control keys in front panel of the Z-URC

550EU. (Figure 4)

The green “OK＂ LED flashes when the operation is successful, and

the red ERROR LED flashes when it’s failed.

Figure 4 Scene Control Keys of the Z-URC

550EU

Additional Device Setups

Add/Delete Devices

Adding Device to the Network

Step Setup Key LED Indication Status

Press in Advance

Setup

• The “OK＂ light turns

Press

• “OK＂ LED flashes

once and stays on

• “LED_B＂ flashes

slowly

Scene

Control Ke