Specifications

16
Note 1: Your target device must be included in the network before this setup
procedure, please refer to [Adding Device to the Network] section.
Removing Device/End-point from a group
Step Setup Key LED Indication Status
1
Press in Advance
Setup
• The “OK＂ light turns
on
2
Select a group number
from 1 to 16 (1-8 or
1-8)
• “OK＂ LED flashes
once and stays on
• “LED_A＂ off
• “LED_B＂ flashes
slowly
3
Press the program/EP
button on the target
device
• “OK＂ LED flashes
once then turns off
• “LED_B＂ off
• Remove Device/End-
point from a group
completed
Note 1: This process will only remove the target device/EP from its
assigned group but will not exclude it from the network.
Deleting a group
Step Setup Key LED Indication Status
1
Press in Advance
Setup
• The “OK＂ light turns
on
2
Select a group number
from 1 to 16 (1-8 or
1-8)
• “OK＂ LED flashes
once and stays on
• “LED_A＂ off
• “LED_B＂ flashes
slowly
• Delete a group
completed
Note 1: This process will only remove the group devices/EPs from its
assigned group but will not exclude it from the network.