Specifications

40
AV Command Operation (Z-Wave Simple AV command class)
After added ZXT-300EU to Z-URC
TM
550EU network, add device to
Simple AV channel and Selecting an IR Device Code in ZXT-300EU.
You can use the function key on Z-URC
TM
550EU to control each
device that you have been set.
• Press a desired device key (e.g. ).
• Press a desired key which you want to transmit the command.
• Z-URC
TM
550EU: Front “OK＂ LED turns on then off when the
key is released.
• ZXT-300EU: LED flashes if Z-wave Simple A/V command is
received and transmits the IR command to your appliances through
each IR port emitter.
IR Code Learning
Learning IR Code on ZXT-300EU
(Learn an IR control code from the original remote control to ZXT-
300EU)
Step Setup Key
LED Indication
Status on
Z-URC
TM
550EU
LED Indication
Status on
ZXT-300EU
1
Switch ZXT-
300EU to your
target EP no. such
as EP1.
(The EP is related
to your AV device
name)
-
• LED flashes
once then keep
on
2
Press in
Advance Setup
• Back “OK＂
LED and front
“OK＂ LED
turns on
-
3
Enter the function
code "2", "5" in the
front
• Front “OK＂
LED flashes
once and stays
on for each
key press
-
4
Press
• Front “OK＂
LED flashes
once and stays
on
-
5
Press a desired key
on
Z-URC
TM
550EU
• Front “OK＂
LED flashes
-