Specifications

43
a flat surface,
aimed at each other
1-3 inches apart
9
Press and keep
holding the key on
your original
equipment remote
which you want to
learn for a few
seconds
• Front “OK＂
LED flashes 2
times then
keep on
• Learn a code
successful
• LED flashes
twice then
keep on
• Learn a code
successful
10
Repeat step 6 to 9
for next key
learning
- -
11
Press any device
key to exit the
learn mode
(e.g. , ,
or )
• All LEDs off
-
Note 1: Error LED in front or back on Z-URC
TM
550EU or ZXT-
300EU Red LED flashes 6 times means that the setup process is failed.
Please redo the process again.
Note 2: On step 9, if no IR signal received for more than 15 seconds,
the Error LED in front will flashes six times then all LED turn off,
Learning on ZXT-300EU mode will exit automatically.
Note 3: Z-URC
TM
550EU and Z-URC
TM
300EU should be placed
together within few meters under learning mode.
Download the preset / learned IR code
(Download a device code from Z-URC
TM
550EU to ZXT-300EU)
Step Setup Key
LED Indication
Status on
Z-URC
TM
550EU
LED Indication
Status on
ZXT-300EU
1
Complete the step
of “Add Device to
Simple AV
channel＂
- -
2
Switch ZXT-
300EU to your
target EP no. such
as EP1.
(The EP is related
-
• LED flashes
once then keep
on