Specifications

adjusting the antenna direction before mounting the ZXT-

300EU.

Note 2: No screws are provided for mounting to a wall.

Note 3: Before mounting to a wall, be sure to fully read the precautions.

1. Obtain two screws suitable for the wall strength and material. The

screw size is shown in the figure below.

2. The positional relationship between the ZXT-300EU key holes

and the screw mounting positions are shown in the figure below.

Note 1: When mounting the screws to the wall, leave a space

between the wall and screw cap as shown in the figure.

3. Insert the ZXT-300EU key holes onto the two screws mounted to

the wall, and then slide downward to secure in place.

4. After securing the ZXT-300EU to the wall, connect the AC/DC

adaptor and cables to the ZXT-300EU.

Note 1: Check that the ZXT-300EU is firmly secured to the wall.

Note 2: Insert the AC/DC adaptor and IR emitter cable so that

they are firmly connected to the ZXT-300EU.

5. When removing the ZXT-300EU from the wall, lift up the ZXT-

300EU, then pull it towards you.